DL3M – Miniature LED illuminators

<<< Back to products index

DL3M compact LED lighter with optics for vision system design

Low cost LED illuminator with high number of models, wavelengths and options

Very compact LED illuminators for direct lighting applications in artificial vision systems based on industrial cameras.

Cable with industrial M8 connector, anodized aluminium body and anti-scratch glass .

Many lens and diffuser options for spot generation or diffuse lighting

Time limited promotions !

Special quotations for System Integrators, OEM and Machine Designers.
Contact us on info@roder.it to have more informations and your special quotations.


The DL3M series of LED lighter is built with the latest LED generation, able to ensuring high brightness, low power consumption, high light output and an average life of more than 50.000 hours of operation.

You can choose between different sizes and different wavelengths. 

The DL3M series case is made of anodized aluminium, which gives a good aesthetic finish and high heat dissipation.

The protection of the optics is carried out with a polycarbonate glass with anti-scratch and anti-aging, removable and replaceable in case of damage. 

The cable with connector allows an easy and quick disconnection from the power supply unit for maintenance or cleaning operations.

Combined with DRV series power supplies and smart controllers it is possible to obtain complete lighting systems, with various supply voltages, possibility of pulsed control, external synchronization, controlled overcurrent and linear partialization.

The reduced dimensions of the illuminator allow the installation also in compact automatic machines and automatic production systems. 

Typical applications are machine vision, manual inspection, microscopes, optical equipments and generic lighting applications.

Order code


Click to view options and configurations :

XXX : Colour of light source

WHW : White – warm 2700 °K
WHN : White – neutral 4000 °K
WHC : White – cold 6200 °K
BLA : Blue 450 nm
BLB : Blue 465 nm
GRN : Green 520 nm
AMB : Amber 520 nm
ORG : Orange 610 nm
RDA : Red 620 nm
RDB : Red 650 nm
RDC : red 720 nm
ULX : Ultraviolet 365 nm
ULY : Ultraviolet 385 nm
ULK : Ultraviolet 395 nm
ULZ : Ultraviolet 405 nm
INA : Infared 850 nm
INB : Infrared 940 nm

Y : Lens

0 : no lens – 120 ° natural emission
1 : with 16° optical lens
2 : with 30° optical lens
3 : with 45° optical lens

Z : Glass

0 : transparent glass
1 : semi-transparent ( low level diffusion )
2 : opaque ( backlight or very even diffusion )

Z : Connection

0 : M8 3 poles industrial connector on one side ( for single use or end-chain connection )
1 : M8 3 poles industrial connector on two sides ( for pass-line connection )
2 : Electronic connector on one side
3 : Electronic connector on two sides


High flux LEDs

Use of latest generation of high efficiency and high brightness LEDs

HTTM Technology

HTTM Technology ( RODER Patent Pending Technology ) for the efficient disposal of the heat produced by LEDs

Anodized aluminium body

Body made of anodized aluminium obtained from a single block to ensure an high dissipation of heat produced and an excellent structural rigidity

48 hours testing

Testing for 48 hours of all models in this series. Test certificate included in the supply.

Industrial connector

Connection with 3-pin M8 industrial connector and retaining ring nut for quick disconnection

Low thickness

The use of SMD technology allows to have a very small thickness

Replaceable glass

Fixing of the protective glass with removable screws for easy and immediate replacement of the slide in case of demage

Scratch-proof protective glass

The protective glass is made of plastics material equipped with an anti-scratch and anti-aging film

Models with 18° optical lens and 1 connection cable

DL3M compact LED lighter with optics for vision system design
  • Lens 18°
  • 1 cable for single interconnection or termination
  • Transparent glass

Models available

10-00-00 : PL-DL3M-025025-WHI-A00000 ( Datasheet )
10-00-00 : PL-DL3M-025025-WHI-A00000 ( Datasheet )
10-00-00 : PL-DL3M-025025-WHI-A00000 ( Datasheet )